New FMB Turbo 3-38 Magazine Type Bar Feed

General Specifications as per Brochure:

Bar Diameter Capacity:
w/out prep: .118" - 1.259" (3mm - 32mm)
with prep: .118" - 1.496" (3mm - 38mm)
Max. bar length: 3800 mm (12' 5")
Min. bar length: 1000 mm (39.4")
Max. remnant length: 420 mm (16.54"
Magazine rack capacity: 11"
Bar loading cycle time: 26 seconds for 12' bar
Material straightness specification: .007" TIR/ft. of material
(V blocks, 3 points equidistant)
Feed force (pusher torque): max 450 N, adjustable
Forward feed rate: 1400 IPM, adjustable
Return feed rate: 2360 IPM, adjustable
Power consumption: 1.5 kw
Operating voltage: 230V/60hz 3-phase
Control voltage: 24V DC
Oil capacity: 80 liters (22 gallons)
Oil viscosity: ISO 150 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 10 liters per loading cycle
Weight (approx.): 3,100 lbs

Standard Features Include:
• (1) Guide channel set to be chosen by customer.
Several sizes to choose from, each handling a specific
stock range. See chart on next page (spindle liner
required if channel set is not lathe’s max capacity)
• (1) Universal telescoping front nose and (1) nylon nose
I.D. liner specific to pusher
• (1) O.D. bar stock collet to be chosen by customer.
(Specific collet needed for each stock diameter.)
• Swiss headstock synchronization device – 400mm
• Automatic remnant retraction, self-centering gripper
• Custom lathe cable and interface plugs

FMB Turbo 3-38 12': $48,900.00
FMB Turbo 3-38 12' Complete Package: $52,600.00
Includes: 2 Guide Channel Set Complete Package:
Includes (2) Channel Sets, (2) Pushers, (2) Nose Liners & (2) Pusher Collets.

FMB Turbo 3-38 6': $48,100
FMB Turbo 3-38 6' 2 Guide Channel Set Complete Package: $51,800.00
Includes (2) Channel Sets, (2) Pushers, (2) Nose Liners & (2) Pusher Collets

Optional Accessories - Prices Subject to Change:
Installation USA..............................................$3,600.00

Addt’l Guide Channel Set................................................................ $3,800
Includes: pusher, revolving tip, standard telescopic nose, spindle liner
Spindle Liner.......................................................................................... $480
Needed when opting for a guide channel set smaller than lathe’s capacity
Bar Stock Pusher Collets...................................................................... $160
Up to 28mm O.D.
Bar Stock Pusher Collets....................................................................... $195
Greater than 28mm O.D.
Hex Stock High Performance Collets......................... Contact Edge Sales
Polyurethane Bushing Blocks............................................................... $160
One set includes upper and lower pieces, used in place of rollers
in movable steady rest when machining hex, square, or profiled stock
Dual Channel Safety Kit....................................................................... $500
Air Knife............................................................................................... $1,800
Recommended to minimize bar feeder oil loss when running shafts
Long Pusher Kit................................................................................. $3,400
Required for some lathes
Extra Long Pusher Kit....................................................................... $4,500
Required for some lathes
Axial Shift Device with Safety Switches..........................................$3,200
Movable Roller Steady Kit................................................................ $3,000
Serial Interface Ethernet Connection................................................. $930
Tall Stands......................................................................................... $2,000
For lathes with spindle center greater than 1200mm
Master Liner........................................................................................... $650
Required when undersizing bar feeder to lathe spindle
(still requires spindle liner)
Bundle Loader Option.................................................. Contact Edge Sales
For 2,267 kg (5,000 lbs) of material
Extended Magazine Lengths....................................... Contact Edge Sales

Turbo 3-38 also available in extended lengths: POR

Bar Feeder installation does not include lathe-side software or hardware
interface. This interface must be supplied and installed by the lathe
OEM or dealer prior to bar feeder installation.

The anchoring of the FMB bar feeder to the floor is a requirement and will be
performed by the service technician.