2007 OGP SmartScope Flash 200 3D Multisensor dimensional measuring system

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
X-Axis Range: 8"
Y-Axis Range: 8"
Z-Axis Range: 6"
Stage: Hard Coat Anodized, with Fixturing Holes, Removable Stage Glass.
Load Capacity: 35 lbs

Imaging/Optics Specifications

Camera:
Flash: Color CCD Camera with 768 x 494 Pixel Array
Flare: Grayscale CCD Camera with 768 x 494 Pixel Array, 3 Lux Sensitivity

Image Processing: 256 Level Gray Scale, 10:1 Sub-Pixel Res.
Standard Optics: 12:1 Programmable Zoom Lens, AccuCentric Auto Calibration (Flash)
Magnification Range: 32x - 280x
Optional Lens Attachments: 1.5x & 2x

Standard Illumination:
Flash: Solid State Substage Back Light, SmartRing Light, and Coaxial (TTL) Surface Light
Flare: Solid State Back Light and SmartRing Light
Optional Illumination: Low Incidence SmartRing Light, Fiber Optic Ring Light.

Working Clearance:
Zoom Lens Only: 2.95"
With 1.5x Lens: 1.97"
With 2.0x Lens: 1.46"

Computer (Minimum Configuration):
CPU: Pentium Class Computer, 1.8 Ghz Minimum
RAM: 512 MB
Hard Drive: 40 GB
Floppy Drive: 1.44 Mbyte
CD-ROM: 32x Minimum
Ports: Serial, Parallel, and USB 2.0
User Interface: Windows 2000

Power Requirements: 100/110/220/240 VAC, +5%, 50/60 Hz, 500 W

Recommended Operating Conditions:
-65-75 Degrees F.
-30-80% Relative Humidity (Non-Condensing)
-Temperature Change Less Than 2 Degrees F. Per Hour
-Vibration <0.0002g Below 15 Hz