Finnsonic Versa Genius+ 50/IV HD VD TD35 Automatic 6-Stage, 8-station fully Automatic Ultrasonic Parts Cleaner, new 2018
Robotic Transfer, Roller Conveyor, Load/Unload Stations
========== EASILY CONVERT TO USING A PASSIVATION PROCESS =============
Finnsonic CNC Control System
2013 Ferroplan Roller Conveyor (s/n: 9998-21-51800)
Wash Baskets (10 pcs)
NOTE: Ultrasonics Hertz can be increase with an in-tank upgrade, ask for more information
Approximate new replacement cost $ 225,000.00
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
Finnsonic Genius 50IV: 8-Stage, 6-tank Fully Automatic Ultrasonic Cleaning System
this system is designed for less max weight per basket & quicker processing times
======================================================================================
Basket internal dimensions: 220 x 415 x195(h) mm (8-3/4" x 16-5/8" x 7-7/8"h)
Max load kg 10 kg (22 lbs.)
Liquid volume/tank 45 l (approx 12 gal)
Ultrasonic power/tank 600 W, transducers on tank base
Heating power 2 kW / tank, 4 kW / hot air dryer
Process direction --- left to right as a standard
Voltage (VAC) 480 V three phase, 60 Hz (transformer required
for any other voltage)
Cable marking Level 2, according to FinnSonic technical specification TS15
Ventilation connection Ø150 mm
Compressed air 5-7 bar, dry and filtered
Space requirement for the line & service ca. 6017 x 3690 x 2980(h) mm,
pumps located under the conveyors
Noise level 75 ± 3 dBA
Takt time Total throughput of baskets depends on required
cleaning and drying times. Due to several process
variables, no exact capacity figure can be
confirmed without further testing.
Process stages and functional units
Process direction from left to right
Stage 1
- ultrasonic cleaning, 1200 W, 30 kHz
- basket dunk for vertical agitation
- storage tank, located inside the machine encapsulation
- auto stop/go control for storage tank circulation
- Belki 211 oil separator
- surface spray bar
- 20” stainless filter with 50µ cartridge for fine filtration
- auto refill
- auto detergent dosing
Stage 2
- ultrasonic cleaning 1200 W, 30 kHz
- basket dunk for vertical agitation
- Closed loop filtration with 20” stainless filter with 50µ cartridge for
fine filtration
- auto stop/go control for closed loop circulation
- auto refill
- auto detergent dosing
Stage 3
- jet spray under immersion
- Closed loop filtration with 20” stainless filter with 50µ cartridge for
fine filtration
- autopurge
Stage 4
- rinse with deionized water
- closed loop deionized water filtration with resin and active carbon filters and
20” stainless filter with 50µ cartridge for fine filtration
- conductivity measurement, measuring range 1micS-1mS
Stage 5
- hot air dryer
- automatic sliding lid to left
Stage 6
- vacuum dryer
Other items included:
- Siemens PLC
- TD35 automatic basket transporter
- full encapsulation with plexi windows, interlocked rear service doors
- filter mist steam condenser
- motorized loading and unloading conveyors, space for 4 baskets on each conveyor
- cooling station with covering for the unloading conveyor
- light beacon
- wash baskets (10 pcs) for Versa Genius 50, with support for customer’s plastic
jigs for blades
- usage meters for water, air and power
- Common water inlet and drain connections for all the stages
- drain pump, 8m vertical delivery
- calibration certificates for temperature sensors and pressure meters
- seaworthy packing
Note: see download the pdf technical brochure for more details
We use cookies to improve your experience. Privacy Policy.