Tsugami BO385L CNC Non-Guide Bushing Sliding Headstock Lathe, New 2011
FMB Turbo 338 Magazine Bar Loader, 12' Capacity
Part Conveyor
Chip Conveyor
High Pressure Coolant
Hours - 5/24:
Run: 24,433
Cutting: 17,550
"To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase."
General Specifications from Manufacturer's Brochure:
Control: Fanuc 0i-TD
Axes: X1, Y1, Z1, X2, Z2, C1, C2
Working Bar Stock Diameter: 8 - 38mm (0.31" - 1.49")
Machining Length: 100mm (3.93")
Main Spindle Drill: 13mm (0.5")
Main Spindle Tap: M12
Back Spindle Chucking: 38mm (1.49")
Back Spindle Drilling: 12mm (0.47")
Back Spindle Tapping: M12
Cross Drilling: 10mm (3/8")
Cross Tapping: M8
Tool Spindle Slotting Cutter: 45mm (1.77")
Back Drilling: 8 (op)
Back Tapping: M6 (op)
Main Spindle Speed: 200-6000 RPM
Back Spindle Speed: 100-7000 RPM
Tool Spindle Speed: 200-5000 RPM
Total Tool Positions: ( St/Max.: Op.) 20/31
Tool Size 20 x 20 x 125mm (0.78" x 0.79" x 4.92")
Rapid Traverse Rates
X1, Y1: 45m/min (1771 IPM)
Z1: 24 m/min (944 IPM)
X2: 32m/min (1259 IPM)
Main Spindle: 7.5 / 11kW
Back Spindle: 3.7 / 5.5 kW
Z1 Axis: 1.2 kW
X1, Y1 Axis: .75 kW
X2, Z2 Axis: 2.5 kW
Cross Drill: 1.0 kW
Coolant pump 0.4 kW
Lubricating oil pump 3 W
Machine Dimensions: 120" x 60" x 78"
Machine Weight: 10,141 lbs
We use cookies to improve your experience. Privacy Policy.