Okuma Multus B750-W CNC Turning Center, New in 2010
ConditionUsed
1 available
Okuma Multus B750-W CNC Turning Center, New in 2010
OSP-P200L CNC Control
15" Color TFT
B-Axis Upper Tool Spindle Full 5-Axis Contouring
Twin Opposed Spindles
Schunk Rota TB 600-275 LH Self-Contained Pneumatic 3-Jaw Chuck
24" Hydraulic Chuck (Right Spindle)
10-3/4” Bore(9.5"+ thru hole)
80 Tool Magazine (Capto C8)
Through Spindle Coolant (MP Systems 1000 psi)
SWM Autoblock Programmable Hydraulic Steady Rest - 2.5" to 13" capacity
Enomoto Chip Conveyor (Side Exit)
Long Boring Bar Attachment which includes:
Actual Long Boring Bar with Replaceable Capto C8 Heads
Multi-Tap Transformer
Three Color Tower Light
Spindle Chiller Unit
Remote Jog Handle
Hi-G Control
500 Sets of Tool Offsets
Tape Data In/Out
Plane Conversion
Profile Generation
B-Axis Interpolation
Rigid Tapping
Helical Cutting
Slant Cutting
Home Position
Spindle Fluctuate
NC Torque Limiter
GM Code Macros
Center Computation
Touch Setter
Touch Sensor
Y-Axis Gauging
Optical Sensor
Pitch Error Compensation
Tool Life Management
Tool Wear Compensation
Inch/Metric Switchable
Cycle Time Calculation
Cycle Time Renew
Tool Center Control
Super Nurbs
Super Hi-NC
Thermal Compensation L2
Servo Link NC
Lap 4
Nose Radius 2B
User Task 2
Expanded Auto Chamfering
Collision Avoidance System
Programming Help
3D Animation
NC Work Counter
NC Work Monitor
Cycle Time Check
Load Monitor
Mac Man
DNC-T1 & T-3
Spindle Orientation
M-Axis Orient
Custom API
Machining Mode
Axis Active Stop
Override Special
Load Monitor
B-Axis .001 Degrees
B-Axis Interpolation
Auto Door
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
Specifications - Buyer to verify all:
# AXIS 7
B-Axis Travel: -30 to 210 Degrees
C-Axis Index (L & R): .001 Degrees
Chuck Size: 24"
Distance Between Spindles: 178.9"
Machine Weight: 120,000 lbs. (approx.)
Max Swing Over Saddle: 41.34"
Max Tool Diameter: 5.31" / 11.81"
Max Tool Length: 23.6"
Max Tool Weight: 66 lbs.
Max Turning Diameter: 41.34"
Milling Spindle Motor: 50 / 40 HP
Milling Spindle Speed: 5000 RPM
Milling Spindle Torque: 372 ft. lbs.
Rapid Traverse Rates: 1575 IPM
Spindle Motor: 50 / 40 HP AC
Spindle Nose: A2-20
Spindle Speed: 1030 RPM
Spindle Taper: Capto C8
Max. Bar Capacity: 10" left spindle (9"+ thru-hole)- 7" Right Spindle
Tools: 80
W-Axis: 133.66"
X-Axis: 42.52"
Y-Axis: + / - 12.99"
Z-Axis: 165.94"
We use cookies to improve your experience. Privacy Policy.