Tsugami B0326-III 8-axis CNC Swiss Lathe, New in 2023

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

Specifications:
Control: Fanuc 32-iB
Machining Range:
Chucking Barstock Diameter: ø32 mm (1.26 in.)
Machining Length: 330 mm (12.99 in.) (Direct-Drive Guide Bushing)
70 mm (2.76 in.) (Chucker Mode))
Drilling Diameter: ø12 mm (.47 in.)
Tapping Diameter: M10
Back Spindle Chucking Barstock Diameter: ø32 mm (1.26 in.)
Back Spindle Drilling Diameter: ø10 mm (.39 in.)
Back Spindle Tapping Diameter: M8
Tool Spindle Drilling Diameter: ø8 mm (.31 in.)
Tool Spindle Tapping Diameter: M6
Tool Spindle Slotting Cutter Diameter: ø45 mm (1.77 in.)

Machine Capability
Main Spindle Speed: 8,000 / min-1
Back Spindle Speed: 8,000 / min-1
Tool Spindle Speed: 6,000 / min-1
Total Tool Number: 34
Tool Size: .625" x 3.94" (square) / 25 mm (round)
Rapid Traverse Rate: 35 m/min (105 ft/min) [(X1, Y1, Y2: 24 m/min (78.74 ft/min)]
Spindle Index: C1 Axis and C2 Axis

Motors
Main Spindle: 3.7/5.5 kW
Back Spindle: 3.7/5.5 kW
Cross Drill of Front Tool Post: 1.0 kW
Cross Drill of Rear Tool Post Drive: 1.4 kW
Rotary Tool of Back Tool Post: 1.4 kW
Rotary Guide Bushing: 1.5 kW
Z1, Y1, X2, Z2: .75 kW
X1, Y2: .5 kW
Coolant Pump: .4 kW
Lubricating Pump: 3 W

Others
Compressed air requirement: .4 MPa or more
Air discharge rate: 100 NL/min
Power Source Requirements: 16.8 KVA
Coolant Tank Capacity: 260 L

Machine Dimensions: 103.5” x 50.4” x 77.5”
Machine Weight: 8,818 lbs.